FEP transparent tube, FEP heat shrinkable tube
FEP special shape tube
Introduction:
FEP tube is made from FEP resin and prepared by the technology of
thermoplastic extrusion and blowing. It has non-sticking,
heat-resistance, aging resistance, corrosive resistance,
non-flammability and good electric property. It can be solid
adhesive for PTFE and also a good adhesive for
laminating various materials. Its working temperature is up to 200
and is an ideal material for circuit board
and flat cable.
Usage :
Office-work machine 's roll packing
paper machine's roll packing
Printing and dyeing machine's roll packing
printing machine roll packing
insulated jacket
the main insulation of rotor of the electric instrument
water treatment
make the magma sample in the field of oil field ect.
UV lamp protecting
FEP & PFA has perfect anticorrosive properties and heat resistance
and electric resistance. they are widely used in the fields of
electrical,petrochemical,industrial,IT industrial.They are the
perfect material so making VU lamp protection tube, anticorrosice
tube
FEP is both transparent to UV-A and UV-C light and totally
resistant to it as well as being temperature resistant. Therefore
,it makes an excellent material for shatter proofing UV lamps used
in the food industry where glass free areas are required. Other
plastic voerings enbrittle or discolour under the effect of the UV
radiation . If the lamp suffers damage ,the glass is contained in
teh shrunk on jacket.
Linear Lamps of any Size.
Fitted boots for U shaped lampes.
Properties :
High low temperature resistance: -200--200oC,high temperature
strength is 2 times higher than PTFEGood adhesive and heat
sealability with PTFE:
Below melting point ,it won't stick any project.Above melting
point, it has perfect adhesive
property with PTFE, Metal and self-adhesion(heat sealing).
None stick to water ,oil : water contact angle: =1150
Electric reliability,High dielectric 60HZ-60MHZ , Under the high
and low temperature,the permittivity keeps 2.1 even if the surface
damaged ,it won't has conductive track.
Volume resistance>1018ohmSurface resistance>2*1013ohm
Voltaic Arc Resistance >165s No electric leakage Weather
resistance: It can be used in sunlight and ozone long
Anti-corrosion :Only in high temperature, Fluorin and alkalis can
effect it,others acid,
alkali or ester won't effect it.
Fireproof : If firing, and will still insulate .
High diaphaneity
UL-Resistance : Good penetrability in ultraviolet radiation,and
lowest refraction coefficient
Technical index of FEP:
| Item | Value |
|
| General purpose | Electric purpose |
| Density g/cm3 | 2.12-2.17 | 2.12-2.17 |
| Temperature range oC | -200 -+200 | -200 -+200 |
| Longi&tray,shrink rate % <= | 3.0 | 3.0 |
| Tensile strength Mpa >= | 14 | 14 |
| Elongation at break % <= | 175 | 175 |
| Tear Strength (N/m) >= | 4.9x104 | 4.9x104 |
| Dielectric Constanct (106Hz) |
| 2.15 |
| Dissipation Factor 106Hz <= |
| 1x10-3 |
| Volume resistance (ohm.m) |
| 1x1014 |
|
Dielectric Strength TH <= 0.05mm Th 0.05-0.1mm M/V TH >= 0.1mm |
| 100 |
|
| 75 |
|
| 50 |
Specification :
Dia ø1.5 --300mm, Thickness: 0.015mm to 0.75mm. Length :50mm to
unlimited.
For UV lamp T4 T5 T8 T10 T12 , Thickness 0.2 to 0.5mm .
Color and sizes can be customiszed .
We can also offer you FEP coil pipe, FEP bellows,FEP rotary cutting
tube, FEP square tube, FEP rectangle tube, FEP end-sealing tube .
For quotation, please kindly contact us with below detail
information to speed up our service:
1.Thickness
2.ID and OD (post-shrink ID and thickness)
3.colorful or transparent
4.Quantity
Once we get your detail inquiry,we will reply you in 10 hours.
Wish you good business.
Contact:
Mr. Michael zhang Skype:michaelprochema Google talk:zch5584 at
gmail.com
Ali trademanager:cn200020719 QQ:676245587
Special shape FEP/PFA tubes as following ,all can customized.
